Take an inexpensive wooden dowel from the craft store and create this super easy DIY wood bead garland.
Hey guys! It’s time for another Monthly DIY Challenge! If you’re new to the challenge you can read all about it and browse previous month’s projects here.
Our theme for April is: wooden dowels.
For this challenge I decided to turn a simple round wooden dowel into a wood bead garland. Have you seen the price of wood bead garland at home decor stores? It’s outrageous! It’s not much more cost effective to buy your own beads and DIY it either. On the other hand, a dowel is super cheap at the hardware or craft store.
This post contains affiliate links for your convenience. Click here to read my full disclosure policy.
Tools & Materials:
- 3/4″ diameter wooden dowel
- saw or miter box
- sand paper
- power drill and drill bit
- jute string
First, I cut the dowel into 3/4″ wide pieces using a miter saw.
Once I had all my pieces, I drilled a hole in each bead with a power drill and bit and then sanded them down to get rid of any splinters.
Next, I strung them up on some jute string, tying a double knot after each bead.
I tied a loop at one end and tied the other end off with a double knot.
All done! So cute!
I just hooked the loop around the last bead to secure the garland around the lamp base.
Don’t miss any of the dowel projects from the rest of the Monthly DIY Challenge group. Check them all out below.